The station building entrance had a paved area but I knew nothing of the type of materials used so I chose to use concrete paving. I had some left over from the Porthminster project so put it to good use here. The footpath area was laid with 1mm card direct onto the baseboard and cut to shape to allow a parking spot for a vehicle. Then the paving cut from the Metcalfe sheets and PVA glued in place. The supplied edging was cut from the sheets and installed using SupaGlue.
 |
| Grey painting the road surface. |
 |
| Adding the pavement edging. |
 |
| The concrete gutter was added using "Concrete" colour paint. A steady hand can realise a reasonably neat line. |
 |
| Completed paved area... |
No comments:
Post a Comment